View Single Post
Old 12-04-2006, 05:14 PM   #1 (permalink)
hackskii
UK-Muscle Moderator
 
hackskii's Avatar
 
Join Date: Jul 2003
Location: Sunny Southern California U.S.A.
Posts: 23,164
hackskii Has greatness beyond wordshackskii Has greatness beyond wordshackskii Has greatness beyond words
hackskii Has greatness beyond wordshackskii Has greatness beyond wordshackskii Has greatness beyond words
Ok, this should clear up some things on MTII

Melanotan

Whoever you order from, MT-2 will arrive to you as a lyophilized (or freeze-dried) white crystalline powder in the vials. It is very cold when it arrives. Melanotan when in its lyophilized state lasts slightly over a year in your freezer. So you will store Melanotan in your freezer.

Vials are generally aliquoted to have 10 mg of Melanotan per vial. So if you order 40 mg, you receive 4 vials. Once you receive your vials of Melanotan, you will reconstitute ONE of them and put the others in the freezer, keeping them (lyophilized/freeze-dried) until you are ready to use them.

When I say reconstitute what I mean is you will mix something called bacteriostatic water in the vials. Bacteriostatic water is easily obtained at any london drugs, pharmasave, shoppers drug mart, etc. It's very easy to get and very cheap (a couple of bucks). You DO NOT need a presciption for bacteriostatic water. It is just pure water with an antibacterial agent so that the Melanotan remains 100% stable and sanitized throughout usage. You mix the peptide with the bac water so that you can administer it.

You will mix a vial with 1.5 cc (150 units) of bacteriostatic water -- this is easily measurable by using your syringe to mix it. Then you will vigorously shake the vial with water added for about 2 minutes so that the melanotan dissolves and defrosts properly. And that concludes the process of reconstitution. Remember, you will only reconstitute one vial of Melanotan at a time and use that vial until it is empty. Only then will you repeat process with a new vial.

The reason you only reconstitute one vial at a time is b/c the peptide is much more fragile once you've mixed it with bacteriostatic water and will only last for about 10-11 days in the fridge after this point.

Again, in the freezer in its freeze-dried (lyophilized) state, the Melanotan lasts for over a year, but not once mixed with water and defrosted.

You store the reconstituted vial in your refridgerator (NOT FREEZER) b/c otherwise it would freeze again (the more you freeze and defrost any peptide, the more it degrades). You finish off that vial during the next 9-11 days and then move on to the next.

MAKE SURE you keep reconstituted melanotan in the refridgerator and do not leave it on the counter. It degrades rapidly in room temperature environment and will not last more than a couple of days or less like this.

I hope this clarifies storage and to some degree usage of the peptide.


A safe daily dosing chart for the initial loading phase of MT-2 administration for tanning:

The following chart assumes a concentration of 0.02mg/kg of MT-II -- this is fairly low dose for reasonable results. This amount is still low enough to produce a tan with minimal acclimation side-effects (which last for about 3-4 days the very first time you use MT-2 for some people -- I'll go in detail on these soon). Although, you could also go with a lower concentration, say 0.017mg/kg -- but you will need a different chart. The chart was compiled assuming that you are using 10mg vials. NOTA BENE: you don't have to be too specific about how much you take. I sometimes skip days, or take 3 mg in one day. MT-2 has been shown to be non-toxic, just don't go overboard. Don't exceed 3.5 mg per day -- you're just wasting peptide & money b/c it won't all get absorbed.

10 mg / 12.00 injections = 0.833 mg --- 42 kg = 92 lbs @0.02mg/kg

10 mg / 11.50 injections = 0.870 mg --- 43 kg = 96 lbs @0.02mg/kg
10 mg / 11.00 injections = 0.909 mg --- 45 kg = 100 lbs @0.02mg/kg

10 mg / 10.50 injections = 0.952 mg --- 48 kg = 105 lbs @0.02mg/kg
10 mg / 10.00 injections = 1.000 mg --- 50 kg = 110 lbs @0.02mg/kg

10 mg / 9.50 injections = 1.053 mg --- 53 kg = 116 lbs @0.02mg/kg
10 mg / 9.00 injections = 1.111 mg --- 55 kg = 122 lbs @0.02mg/kg

10 mg / 8.50 injections = 1.176 mg --- 59 kg = 130 lbs @0.02mg/kg
10 mg / 8.00 injections = 1.250 mg --- 63 kg = 138 lbs @0.02mg/kg

10 mg / 7.50 injections = 1.333 mg --- 67 kg = 147 lbs @0.02mg/kg
10 mg / 7.00 injections = 1.429 mg --- 71 kg = 157 lbs @0.02mg/kg

10 mg / 6.75 injections = 1.481 mg --- 74 kg = 163 lbs @0.02mg/kg
10 mg / 6.50 injections = 1.538 mg --- 77 kg = 170 lbs @0.02mg/kg

10 mg / 6.25 injections = 1.600 mg --- 80 kg = 176 lbs @0.02mg/kg
10 mg / 6.00 injections = 1.667 mg --- 83 kg = 184 lbs @0.02mg/kg

10 mg / 5.75 injections = 1.739 mg --- 87 kg = 192 lbs @0.02mg/kg
10 mg / 5.50 injections = 1.818 mg --- 91 kg = 200 lbs @0.02mg/kg

10 mg / 5.25 injections = 1.905 mg --- 95 kg = 210 lbs @0.02mg/kg
10 mg / 5.00 injections = 2.000 mg --- 100 kg = 220 lbs @0.02mg/kg

10 mg / 4.75 injections = 2.105 mg --- 105 kg = 232 lbs @0.02mg/kg
10 mg / 4.50 injections = 2.222 mg --- 111 kg = 245 lbs @0.02mg/kg

10 mg / 4.25 injections = 2.353 mg --- 118 kg = 259 lbs @0.02mg/kg
10 mg / 4.00 injections = 2.500 mg --- 125 kg = 276 lbs @0.02mg/kg


I recommend with 10 mg vials that people simply add 1.5 cc (150 units) of dilutant to vials for reconstitution. This way when you withdraw 15 cc with syringe, that equals 1 mg of Melanotan. Hope this helps.
__________________
"Life is not measured by the number of breaths we take, but by the moments that take our breath away." - George Carlin


Scott


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
hackskii is offline   Reply With Quote